<br>Current ADC raw value. The format is binary two\'s complement.
<br>Current ADC raw value. The format depends on ADC configuration; Upon reset, the ADC is<br>configured for "offset binary". The FMC-ADC driver when loaded, will change this to<br>binary two\'s complement.
</ul>
<aname="ch1_calib"></a>
<h3><aname="sect_3_18">2.18. ch1_calib</a></h3>
...
...
@@ -2311,7 +2291,7 @@ Channel 2 status register
<li><b>
val
</b>[<i>ro</i>]: Channel 2 current ACD value
<br>Current ADC raw value. The format is binary two\'s complement.
<br>Current ADC raw value. The format depends on ADC configuration; Upon reset, the ADC is<br>configured for "offset binary". The FMC-ADC driver when loaded, will change this to<br>binary two\'s complement.
</ul>
<aname="ch2_calib"></a>
<h3><aname="sect_3_24">2.24. ch2_calib</a></h3>
...
...
@@ -2795,7 +2775,7 @@ Channel 3 status register
<li><b>
val
</b>[<i>ro</i>]: Channel 3 current ADC value
<br>Current ADC raw value. The format is binary two\'s complement.
<br>Current ADC raw value. The format depends on ADC configuration; Upon reset, the ADC is<br>configured for "offset binary". The FMC-ADC driver when loaded, will change this to<br>binary two\'s complement.
</ul>
<aname="ch3_calib"></a>
<h3><aname="sect_3_30">2.30. ch3_calib</a></h3>
...
...
@@ -3279,7 +3259,7 @@ Channel 4 status register
<li><b>
val
</b>[<i>ro</i>]: Channel 4 current ADC value
<br>Current ADC raw value. The format is binary two\'s complement.
<br>Current ADC raw value. The format depends on ADC configuration; Upon reset, the ADC is<br>configured for "offset binary". The FMC-ADC driver when loaded, will change this to<br>binary two\'s complement.