Prior to this commit, manual pulse triggering did not work when the glitch
filter was enabled. Now, this was fixed by extending the trigger pulse the
conv_man_trig module generates. This accounts for the situation where the
pulse generator has the glitch filter enabled.
I also fixed a bug in conv_pulse_gen; this fix was commited two commits ago.
The bug consisted of the gf_off part of the pulse generator triggering even
when the glitch filter was enabled. This resulted in a continuous high pulse
generated on the output when the glitch filter was switched from on to off.
Granted, such a situation should not occur in operation, since a board needs
to be removed from the crate in order to flip a switch. Nonetheless, it was a
but, so I've fixed it by making sure the gf_off part of the design only triggers
when the glitch filter is disabled:
if (en_i = '1') and (gf_en_n_i = '1') then
pulse_gf_off <= '1';
A warning will be placed in the docs for release versions 1.0 and 0.0 (golden).
Signed-off-by: Theodor Stana <firstname.lastname@example.org>