Commit b421054a authored by Theodor-Adrian Stana's avatar Theodor-Adrian Stana

Added golden firmware information to HDL guide

Signed-off-by: Theodor-Adrian Stana's avatarTheodor Stana <t.stana@cern.ch>
parent 9d2ca9ea
...@@ -9,9 +9,9 @@ ...@@ -9,9 +9,9 @@
\noindent \rule{\textwidth}{.1cm} \noindent \rule{\textwidth}{.1cm}
\hfill Gateware v1.0 \hfill Golden Firmware, v0.0
\hfill January 5, 2014 \hfill January 7, 2014
\vspace*{3cm} \vspace*{3cm}
......
...@@ -49,13 +49,7 @@ ...@@ -49,13 +49,7 @@
\hline \hline
\multicolumn{1}{c}{\textbf{Date}} & \multicolumn{1}{c}{\textbf{Version}} & \multicolumn{1}{c}{\textbf{Change}} \\ \multicolumn{1}{c}{\textbf{Date}} & \multicolumn{1}{c}{\textbf{Version}} & \multicolumn{1}{c}{\textbf{Change}} \\
\hline \hline
04-07-2013 & 0.1 & First draft \\ 07-01-2014 & 1.0 & Created document from original HDL guide as the Golden Firmware HDL guide \\
26-07-2013 & 0.2 & Second draft \\
07-08-2013 & 1.02 & Added pulse rejection to \textit{ctb\_pulse\_gen} \\
14-08-2013 & 1.02 & Changed name of \textit{elma\_i2c} to \textit{vbcp\_wb} \\
29-10-2013 & 1.03 & Added MultiBoot support to firmware \\
20-11-2013 & 1.04 & Changed system clock to 20~MHz \\
05-01-2014 & 1.05 & Updated folder structure and renamed \textit{vbcp\_wb} to \textit{i2c\_bridge} \\
\hline \hline
\end{tabular} \end{tabular}
} }
...@@ -104,6 +98,9 @@ the CONV-TTL-BLO capabilities: ...@@ -104,6 +98,9 @@ the CONV-TTL-BLO capabilities:
\item remote reprogramming via I$^2$C \item remote reprogramming via I$^2$C
\end{itemize} \end{itemize}
This is the HDL for the Golden firmware, that to which the Spartan-6 configures
in case of a MultiBoot error.
Figure~\ref{fig:hdl-bd} shows a simplified block diagram of the HDL firmware. Each of the Figure~\ref{fig:hdl-bd} shows a simplified block diagram of the HDL firmware. Each of the
blocks in the figure is presented in following sections. blocks in the figure is presented in following sections.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment