Skip to content

C
Conv TTL Blocking - Gateware
Commit 659b8b70 authored by Theodor-Adrian Stana's avatar Theodor-Adrian Stana
Browse files
Options

Italicized access command parameters in vbcp-wb doc 

Signed-off-by: Theodor-Adrian Stana's avatarTheodor Stana <t.stana@cern.ch>
parent efc623cc
Hide whitespace changes
Inline Side-by-side
Showing with 9 additions and 9 deletions
doc/vbcp_wb/vbcp_wb.pdf
View file @ 659b8b70
No preview for this file type
doc/vbcp_wb/vbcp_wb.tex
View file @ 659b8b70
...@@ -294,16 +294,16 @@ module are shown in Table~\ref{tbl:cmds}. ...@@ -294,16 +294,16 @@ module are shown in Table~\ref{tbl:cmds}.
{ {
\begin{tabular}{l p{.6\textwidth}} \begin{tabular}{l p{.6\textwidth}}
\hline \hline
\multicolumn{1}{c}{\textbf{Command}} & \multicolumn{1}{c}{\textbf{Description}} \\ \multicolumn{1}{c}{\textbf{Command}} & \multicolumn{1}{c}{\textbf{Description}} \\
\hline \hline
writereg slot addr val & Writes the \textit{hex} value \textit{val} to hex address writereg \textit{slot addr val} & Writes the \textit{hex} value \textit{val} to hex address
\textit{addr} of board in slot number \textit{slot} \\ \textit{addr} of board in slot number \textit{slot} \\
writemregs slot addr v1 .. v8 & This command is similar to the \textit{writereg} writemregs \textit{slot addr v1 .. v8} & This command is similar to the \textit{writereg}
command, but it allows writing up to eight different values command, but it allows writing up to eight different values
to the same Wishbone register. The values are given in hexadecimal to the same Wishbone register. The values are given in hexadecimal
format and are separate by spaces \\ format and are separate by spaces \\
readreg slot addr & Returns the value of register at hex address \textit{addr} of readreg \textit{slot addr} & Returns the value of register at hex address \textit{addr} of
board in slot number \textit{slot} \\ board in slot number \textit{slot} \\
\hline \hline
\end{tabular} \end{tabular}
} }
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment