Commit 1d502af8 authored by Denia Bouhired-Ferrag's avatar Denia Bouhired-Ferrag

Doc: Updated hdl guide for release 4

parent 63d84121
...@@ -9,7 +9,7 @@ ...@@ -9,7 +9,7 @@
\noindent \rule{\textwidth}{.1cm} \noindent \rule{\textwidth}{.1cm}
\hfill Gateware v3.0 \hfill Gateware v4.0
\hfill February 17, 2017 \hfill February 17, 2017
......
...@@ -276,7 +276,7 @@ RST\_UNLOCK ...@@ -276,7 +276,7 @@ RST\_UNLOCK
\item \begin{small} \item \begin{small}
{\bf {\bf
RST RST
} [\emph{read/write}]: Reset bit - active only if RST_UNLOCK is 1 } [\emph{read/write}]: Reset bit - active only if RST\_UNLOCK is 1
\\ \\
1 -- initiate logic reset \\ 0 -- no reset 1 -- initiate logic reset \\ 0 -- no reset
\end{small} \end{small}
......
...@@ -307,6 +307,7 @@ when it is OFF. ...@@ -307,6 +307,7 @@ when it is OFF.
%============================================================================== %==============================================================================
\subsection{Pulse LED output logic} \subsection{Pulse LED output logic}
\label{sec:pulse-led} \label{sec:pulse-led}
\textit {Note that this very same logic has been moved inside conv-common-gw submodule for release 4 of the gateware.}\\
Since in the CONV-TTL-BLO schematics the pulse LEDs are driven from inverting Since in the CONV-TTL-BLO schematics the pulse LEDs are driven from inverting
Schmitt triggers to ground, the active-high pulse LED output from \textit{conv\_common\_gw} Schmitt triggers to ground, the active-high pulse LED output from \textit{conv\_common\_gw}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment