AMC CPU COM6 issueshttps://ohwr.org/project/amc-cpu-com6/issues2019-02-12T11:01:05Zhttps://ohwr.org/project/amc-cpu-com6/issues/1NI-SI PullUp/PullDown2019-02-12T11:01:05ZPiotr MiedzikNI-SI PullUp/PullDown??If NC-SI is disconnected: (1) an external pull-down should be used for
the NCSI\_CLK\_IN
and NCSI\_TX\_EN pins; a pull-down (10 K Ω) should be used for
NCSI\_TXD\[1:0\].??https://ohwr.org/project/amc-cpu-com6/issues/2add FCLK jumper2019-02-12T11:01:05ZGrzegorz Kasprowiczadd FCLK jumperadd connection between CLK distribution circuit and AMC - now it
requires mezzanine to be present.Grzegorz KasprowiczGrzegorz Kasprowiczhttps://ohwr.org/project/amc-cpu-com6/issues/3heatsink fixing2019-02-12T11:01:06ZGrzegorz Kasprowiczheatsink fixingadd holes for custom heatsinkGrzegorz KasprowiczGrzegorz Kasprowiczhttps://ohwr.org/project/amc-cpu-com6/issues/4holes for JP2, CON4,5 not mounted2019-02-12T11:01:06ZGrzegorz Kasprowiczholes for JP2, CON4,5 not mountedincrease hole size for JP2 or change to SMT version
mark CON4,5 as not mountedGrzegorz KasprowiczGrzegorz Kasprowiczhttps://ohwr.org/project/amc-cpu-com6/issues/5error in CERN libraries - reverse LED polarity2019-02-12T11:01:06ZGrzegorz Kasprowiczerror in CERN libraries - reverse LED polarityLED\_AVAGO\_HSME-C110 has reversed polarity, it cannot be mounted by SMT
picka and place machineGrzegorz KasprowiczGrzegorz Kasprowiczhttps://ohwr.org/project/amc-cpu-com6/issues/6IC9: out2 swapped2019-02-12T11:01:06ZGrzegorz KasprowiczIC9: out2 swappedPolarity of OUT2 is swapped. it is not used at the moment but it should
be reversed for future reference.Grzegorz KasprowiczGrzegorz Kasprowiczhttps://ohwr.org/project/amc-cpu-com6/issues/7mPCIe support for SATA2019-02-12T11:01:07ZGrzegorz KasprowiczmPCIe support for SATAroute one of free SATA ports to the mini PCIe Express to support
on-board SSDsGrzegorz KasprowiczGrzegorz Kasprowicz