Explore projects
-
White Rabbit PTP Core software for LatticeMico32. It consists of a software wrapper for running a PTP daemon without an operating system and device drivers for WRPC HDL internals.
Updated -
-
A White Rabbit Timing Receiver in AMC (Advanced Mezzanine Card, AdvancedMC) format. More info at the Wiki page
Updated -
Updated
-
FMC LPC card with two High Voltage (HV) outputs and one Low Voltage (5-10V) output. Has mV voltage sensing and mA current sensing capabilities. More info at the Wiki page
Updated -
Development of software for the White Rabbit switch, and in particular the embedded Linux system running in the ARM9 processor. More info at the Wiki page
Updated -
-
FPGA Firmware ( "Gateware" ) for AIDA-2020 TLU and AIDA mini-TLU
Uses "IPBus Build" ( ipbb )
Build instructions at Instructions here
Updated -
A software framework for Linux device drivers aimed at supporting controls and data acquisition hardware. ZIO supports sub-nanosecond timestamps, block-oriented input and output and transport of meta-data with the data samples. Users can change the buffer type and trigger type associated with a device at run time, and all of devices, triggers and buffers are easily implemented as add-on modules.
The PF_ZIO implementation, currently in beta status, implements a network interface to the ZIO transport, which allows each I/O channel to generate or receive network frames. Applications see the network of devices and can talk with several of them from the same socket. We support SOCK_STREAM, SOCK_DGRAM and SOCK_RAW.
Updated -
This project guides new users to start in the White Rabbit “World” with simple experiments. The starting kit uses two SPEC + FMC-DIO cards. Each node allows basic operations such as input timestamping or programmable output pulse generation. Additionally, specific software and gateware layers allow to use it as a standard network interface card implementing the White Rabbit technology functionalities.
Updated -
FPGA Firmware ( "Gateware" ) for AIDA-2020 TLU and AIDA mini-TLU
Uses "IPBus Build" ( ipbb )
Build instructions at Instructions here
Updated -
Programmable attenuator of RF signals with very high voltage range (50mV – 1000 V) for protecting digitizers against damage by high voltage signals. Four channels with SMA connectors; Three attenuation values: 0, -20, -40 dB; Bandwidth: DC – 2 GHz.
Updated -
This is a port of an older Linux ptpd to support White Rabbit extensions and run both in hosted and freestanding environment. In the future we plan to replace it with PPSI, which has a much better design, but ptp-noposix is currently working pretty well despite being difficult to maintain.
Updated -
Production and functional tests for FMC TDC 1ns 5cha.
Updated -
A project to host all software and hardware developments related to testing the White Rabbit switch.
Updated -
A distributed oscilloscope based on the White Rabbit network. More info at the Wiki page
Updated -
Software support for the SVEC board, including kernel and user-space Linux code.
Updated -
A system to characterise large area silicon pad sensors with several hundred channels. It consists of two PCBs. One is an active switching 512-to-1 matrix. The second one is a passive probe card to contact the sensor. Software.
Updated -
On the Open Hardware Repository you can find projects which use soft-cpu (e.g. mock-turtle, white-rabbit-core, wr-switch). This project offers a toolchain that you can use to compile your code for the soft-cpu target (only LM32 for the time being). The project provides only the necessary makefiles to build the toolchain, so it will be necessary to compile the toolchain.
Updated -
A system to characterize large area silicon pad sensors with several hundred channels. This repository contains the microcontroller firmware.
Updated