Explore projects
-
This project covers the hardware development of the White Rabbit switch.
Updated -
This project contains all the HDL gateware necessary for the FPGA of the WR switch.
Updated -
This project contains all the HDL gateware necessary for the FPGA of the WR switch.
Updated -
The robustness of a White Rabbit Network (WRN) is a broad subject covering methods (HW & SW) which enable to increase overall reliability of a WR-based system. This includes Forward Error Correction (FEC), Quality of Service (QoS) assurance, support of network redundancy, proper network design, thorough diagnostics, and increasing the reliability of network components (i.e. switches, nodes). Here, these methods are described and their implementation sources gathered.
Updated -
A collection of cores needed in the White Rabbit node and switch. Includes White Rabbit PTP Core (WRPC).
Updated -
A collection of cores needed in the White Rabbit node and switch. Includes White Rabbit PTP Core (WRPC).
Updated -
White Rabbit is a fully deterministic Ethernet-based network for general purpose data transfer and synchronization. It can synchronize over 1000 nodes with sub-ns accuracy over fiber lengths of up to 10 km. Commercially available. More info at the Wiki page
Updated -
The VFC is a VME carrier for two VITA 57 (FMC) mezzanines. For more details please refer to the wiki pages. Obsolete project. Replaced by VFC-HD.
Updated -
The TimIQ system is an IQ modulator allowing to phase shift a radio frequency clock with a resolution of 40 fs and an accuracy of 8 ps. Software.
Updated -
Updated
-
The aim of this project is to evaluate resources required to run wr switch HDL on Xilinx Ultrascale+ FPGA
Updated -
COM Express based PXIe system controller. COM Express Compact Pin-out type 6, 16-lane PCIe GEN3. PXIe trigger line on front-panel. More info at the Wiki page
Updated -
A software suite written in Python to help with production tests of PCBs. AKA PTS.
%(red)This pts-base project is used to re-organise the current pts project In the future this project will replace the existing pts project.
Updated -
A software suite written in Python to help with production tests of PCBs. AKA PTS.
%(red)This pts-base project is used to re-organise the current pts project In the future this project will replace the existing pts project.
Updated -
Hardware design of the PandABox. Includes schematics, PCB layout and manufacturing files.
Updated -
The nanoFIP test board is used to test the functionality of the nanoFIP design. Apart from the nanoFIP chip, the FielDrive and the FieldTR it houses another Actel FPGA that can access nanoFIP in stand-alone or in memory mode. This FPGA can also communicate through a RS232 port with a windows PC running the NFTC software. The components on the board are placed in such a way that with a focused beam, radiation tests can be performed to the nanoFIP, FielDrive and FieldTR, leaving the rest if the components in a radiation-safe zone. The card has been designed by the company HLP.
Updated -
-
-
The open-source HEV ventilator implements the modes PC-A/C, PC-A/C-PRVC, PC-PSV and CPAP More info at the Wiki page
Updated -
A web based commander based on Node.JS for the HDLMake tool.
Updated