Explore GitLab
Discover projects, groups and snippets. Share your projects with others
-
Projects / DIOT Kintex Ultrascale-based Peripheral Board FMC Carrier
DI/OT Kintex Ultrascale-based Peripheral Board with HPC FMC and SODIMM DDR4 slot. More info at the Wiki page
1updated -
Projects / White Rabbit Switch - Software
Development of software for the White Rabbit switch, and in particular the embedded Linux system running in the ARM9 processor. More info at the Wiki page
-
Projects / Macbeth
The Macbeth (MAChine / BEamline Timing Hardware) system is aimed to synchronize the beamlines experimental devices (pump-probe, laser, …) with the accelerator beam with a high accuracy
0updated -
Projects / Mock Turtle
Mock Turtle is an HDL core of a generic control system node, based on a deterministic multicore CPU architecture. Mock Turtle can use White Rabbit as the means of communication and synchronization in a distributed system. More info at the Wiki page
0updated -
Projects / White Rabbit Switch - Gateware
This project contains all the HDL gateware necessary for the FPGA of the WR switch.
-
Projects / Simple PCIe FMC carrier SPEC
A simple 4-lane PCIe carrier for a low pin count FPGA Mezzanine Card (VITA 57). It supports the White Rabbit timing and control network. Commercially available. Linux and Labview drivers available for some mezzanine cards. More info at the Wiki page
2updated -
Projects / DIOT Mixed Digital IO RTM
Mixed Digital IO RTM for the DI/OT project. More info at the Wiki page
0updated -
Projects / PPSi
A Precise Time Protocol (PTP, IEEE 1588) software stack whose single source code can be compiled for many architectures (POSIX systems, WR switch, WR node, ...) and which is easily extensible.
1updated -
Projects / Platform-independent core collection
A collection of platform-independent cores such as memories, synchronizer circuits and Wishbone cores.
5updated -
Projects / FMC DEL 1ns 4cha
A fine delay generator in FMC format with 1 input and 4 outputs. The resolution is 1 ns. Commercially available. More info at the Wiki page
2updated -
Projects / BabyWR
BabyWR is a general purpose small pluggable WR node in a M.2 form-factor. More info at the Wiki page
0updated -
Projects / White Rabbit core collection
A collection of cores needed in the White Rabbit node and switch. Includes White Rabbit PTP Core (WRPC).
-
Projects / DIOT CompactPCI Serial crate hardware
DIOT 3U crate mechanics and backplane compliant with CompactPCI-Serial standard.
0updated -
Projects / Compact Universal Timing Endpoint Based on White Rabbit with Artix7 - Cute-WR-A7
Compact Universal Timing Endpoint Based on White Rabbit with Xilinx Artix7. Follow-up of the CUTE-WR-DP. More info at the Wiki page
0updated -
Projects / Software for White Rabbit PTP Core
White Rabbit PTP Core software for LatticeMico32. It consists of a software wrapper for running a PTP daemon without an operating system and device drivers for WRPC HDL internals.
-
Projects / White Rabbit
White Rabbit is a fully deterministic Ethernet-based network for general purpose data transfer and synchronization. It can synchronize over 1000 nodes with sub-ns accuracy over fiber lengths of up to 10 km. Commercially available. More info at the Wiki page
2updated -
Projects / fmc-nanofip
FMC nanoFIP is an interface card for the WorldFIP network in an LPC FMC form-factor. More info at the Wiki page
0updated -
Projects / FMC ADC 100M 14b 4cha
FmcAdc100M14b4cha is a 4 channel 100MSPS 14 bit ADC low pin count FPGA Mezzanine Card (VITA 57). More info at the Wiki page
2updated -
Projects / Compact Universal Timing Endpoint Based on White Rabbit with Dual Ports Cute-WR-DP
The CUTE-WR-DP is the enhanced version of CUTE-WR with dual WR ports. You can use it as the normal WR node with one SFP port. CUTE-WR-DP can work in chain to support cascade topology. In future, CUTE-WR-DP could support dualport redundancy function for high reliable application. More info at the Wiki page
1updated -
Projects / RaToPUS radiation-tolerant AC-DC power supply
Radiation-tolerant AC/DC power supply unit (PSU). In: 230VAC, 50Hz, Out: +12V, 8.33A (100W) and +5V, 2A (10W). Possibility for redundancy. The design is CompactPCI compatible. Part of DIOT project.
0updated