Explore GitLab
Discover projects, groups and snippets. Share your projects with others
-
Projects / urv-core
The uRV (Micro RISC-V) core is a small-sized implementation of a 32-bit RISC-V core, targeted specifically at FPGAs. More info at the Wiki page
1updated -
Projects / RF Multiplexer 8ch 1GHz
This is a PCB-design + Arduino firmware for an Ethernet-controlled 1:8 RF-multiplexer. It allows selecting as output one of eight input-channels, as commonly used e.g. in timing-laboratories when one wants to measure many RF-sources (clock outputs like 1PPS or 10MHz) with a single instrument (frequency or time-interval counter). The design is for two independent MUX-boards to fit in a 1U 19” rack enclosure. For more information, see the wiki
1updated -
Projects / FMC DEL 1ns 2cha
A fine delay generator in FMC LPC format with 1 input and 2 outputs. The resolution is 1 ns. Optimized for high frequency pulse repetition rates synchronized to an external clock. More info at the Wiki page
2updated -
Projects / Pex10
Arria10-based open source timing receiver (PCIe format)
0updated -
Projects / White Rabbit Calibration
Project containing information about how to calibrate White Rabbit gear. See also https://www.ohwr.org/project/white-rabbit/wikis/Calibration More info at the Wiki page
0updated -
Projects / White Rabbit Switch - Testing
A project to host all software and hardware developments related to testing the White Rabbit switch.
0updated -
Projects / FSI DIOT Photodetection module 8ch
A board that has eyes
0updated -
Projects / WRS Fan-less hardware
Fanless version of the White Rabbit Switch WRS-3/18 (hardware version 3.4) with the low-jitter daughterboard integrated. More info at the Wiki page
0updated -
Projects / 10G White Rabbit Network Interface Core
A WR compliant Network Interface Core (WR-NIC) for 1G and 10G Ethernet communication. More info at the Wiki page
0updated -
Projects / Gennum GN4124 core
A bridge between the local bus of the Gennum GN4124 (PCIe to local bus bridge) and Wishbone.
0updated -
Projects / WRTD Reference Designs
Collection of WRTD reference designs provided by (and used at) CERN
0updated -
Projects / FMC High-Voltage supply - fmc-hv-2ch
FMC LPC card with two High Voltage (HV) outputs and one Low Voltage (5-10V) output. Has mV voltage sensing and mA current sensing capabilities. More info at the Wiki page
1updated -
Projects / VME64x core
A VHDL core for a VME64x slave. The other side behaves like a Wishbone master.
More info at the Wiki page2updated -
Projects / WRS with low jitter logic integrated
White Rabbit Switch WRS-3/18 (hardware version 3.4) with the low-jitter daughterboard integrated. More info at the Wiki page
0updated -
Projects / OHR Meta Project
A meta project used to discuss and present information about Open Hardware and related subjects. More info at the Wiki page More info about the CERN Open Hardware licence More info about the OHR.org site support
1updated -
Projects / EtherBone Core
Etherbone is an FPGA-core that connects Ethernet to internal on-chip wishbone buses permitting any core to talk to any other across Ethernet.
0updated -
Projects / White Rabbit Compliance Tests
This project hosts compliance tests dedicated for WR devices and based on the ATTEST framework available from Veryx Technologies. To use the material available in this project, the ATTEST framework needs to be purchased.
0updated -
Projects / wr2rf-vme
A VME card that is used to recover RF, bunch and revolution clocks over a white rabbit network.
2updated -
Projects / White Rabbit Trigger Distribution
White Rabbit Trigger Distribution project. More info at the Wiki page
2updated