Explore projects

SDB (Self-describing Bus) allows to enumerate the cores that are live in the current FPGA binary, either from the host computer or from the internal soft-core CPU in the FPGA itself. The project provides the software support and the specification. More info at the Wiki page

This library provides a generic API for ADC devices, so that applications can use this API to access any of the supported ADC boards. Currently the library supports the following boards:

fmc-adc-100m14b14cha

For testing and debugging purpose it supports also a couple of virtual boards that you can use to start the development of your application.

More info at the Wiki page

Mock Turtle is an HDL core of a generic control system node, based on a deterministic multicore CPU architecture. Mock Turtle can use White Rabbit as the means of communication and synchronization in a distributed system. More info at the Wiki page

The uRV (Micro RISC-V) core is a small-sized implementation of a 32-bit RISC-V core, targeted specifically at FPGAs. More info at the Wiki page

Production and functional tests for fmc-dac-600m-12b-1cha-dds

Data centre environmental sensor - Dust, Temperature, Relative Humidity, Fan - Serial 1 channel - version 1. An environmental sensor for Data Centers that continuously measures airborne particle density in high airflow as well as temperature and relative humidity. It can control its fan speed if needed (PWM controlled fans) and monitors FAN rotational speed (tachometer equipped fans) for precise airflow control and monitoring. It is close to maintenance free and can be integrated in compact enclosures (for example tape drive tray or even an ATX PSU case...). More info at the Wiki page

A carrier for two low pin count FPGA Mezzanine Cards (VITA 57), analog inputs and fail-safe functionality. It has memory and clocking resources and supports the White Rabbit timing and control network. Stand-alone board for use in a 'pizza-box'. More info at the Wiki page

MMC firmware written in C, running on a microcontroller inside the board. Written first for the AFC boards. This firmware is thought to be generic enough so other AMC boards could reuse a large part of it. For now, the only "port" is for the LPC1764 chip, but more are planned.

Project containing information about how to calibrate White Rabbit gear. See also https://www.ohwr.org/project/white-rabbit/wikis/Calibration More info at the Wiki page

LIBSFP is a software library that contains generic functions to access SFP devices via I2C.

More info can be found on this wiki page.

A low cost, low complexity FMC carrier based on Xilinx Artix-7

PCIe to VME bridge. More info at the Wiki page

A simple 4-lane PCIe carrier for a FPGA Mezzanine Card (VITA 57). It supports the White Rabbit timing and control network. More info at the Wiki page

This project contains gateware for the Distributed IO Tier demonstrator according to the CERN Warm Interlocks specification

LIST is a trigger distribution system based on White Rabbit. It can receive a trigger from a “cloud” of devices and distribute it to all relevant devices to for example freeze their acquisition buffers. The latency between reception and transmission of a trigger is done with a low and notably fixed latency, with an accuracy of better than 1 ns. The hardware of the LIST nodes is based on the SVEC FMC carrier equipped with a FMC TDC mezzanine and a Fine Delay mezzanine. More info at the Wiki page

TiCkS is a flexible White Rabbit based time-stamping board. It is based on the SPEC board developed for the CTA collaboration. It provides an interface to a CTA camera (Inputs: Read-out Trigger signals, Busy Trigger), (Outputs: PPS signal , 10MHz clock, External trigger signal).

More info at the Wiki page

A system to characterise large area silicon pad sensors with several hundred channels. It consists of two PCBs. One is an active switching 512-to-1 matrix. The second one is a passive probe card to contact the sensor. Software.

A system to characterize large area silicon pad sensors with several hundred channels. This repository contains the microcontroller firmware.

This library provides a generic API for ADC devices, so that applications can use this API to access any of the supported ADC boards. Currently the library supports the following boards:

fmc-adc-100m14b14cha

For testing and debugging purpose it supports also a couple of virtual boards that you can use to start the development of your application.

More info at the Wiki page