Explore projects

Couples a MAROC ASIC (64 channels each with a fixed threshold discriminator and a slow shaper + sample-and-hold + 12-bit ADC) to a FPGA. Read-out by Gigabit Ethernet (firmware supplied supports IPBus). Multiple boards can be plugged together to increase the channel count. Clocking circuitry compatible with the White Rabbit implementation of PTP. More info at the Wiki page

Gateware (HDL design) for nanoFIP.

Mock Turtle is an HDL core of a generic control system node, based on a deterministic multicore CPU architecture. Mock Turtle can use White Rabbit as the means of communication and synchronization in a distributed system. More info at the Wiki page

Gateware (HDL design) for FMC ADC 400k 18b 4cha iso on SPEC and SVEC carriers.

Production and functional tests for fmc-dac-600m-12b-1cha-dds

VHDL core for absolute position encoders (SSI, BISS, ENDAT).

More info at the Wiki page

A carrier for two low pin count FPGA Mezzanine Cards (VITA 57), analog inputs and fail-safe functionality. It has memory and clocking resources and supports the White Rabbit timing and control network. Stand-alone board for use in a 'pizza-box'. More info at the Wiki page

A fine delay generator in FMC LPC format with 1 input and 2 outputs. The resolution is 1 ns. Optimized for high frequency pulse repetition rates synchronized to an external clock. More info at the Wiki page

Multi-channel Time Interval Counter and fine delay generator. Housed in a 19" module. Research project. More info at the Wiki page

Project containing information about how to calibrate White Rabbit gear. See also https://www.ohwr.org/project/white-rabbit/wikis/Calibration More info at the Wiki page

A low cost, low complexity FMC carrier based on Xilinx Artix-7

PCIe to VME bridge. More info at the Wiki page

A simple 4-lane PCIe carrier for a FPGA Mezzanine Card (VITA 57). It supports the White Rabbit timing and control network. More info at the Wiki page

VHDL coding style document to be used at ohwr.org The project contains also a tool to automatically check the coding style. More info at the Wiki page

This project contains gateware for the Distributed IO Tier demonstrator according to the CERN Warm Interlocks specification

This project covers the hardware development of version 4 of the White Rabbit switch (WRS-v4). More info at the Wiki page

TiCkS is a flexible White Rabbit based time-stamping board. It is based on the SPEC board developed for the CTA collaboration. It provides an interface to a CTA camera (Inputs: Read-out Trigger signals, Busy Trigger), (Outputs: PPS signal , 10MHz clock, External trigger signal).

More info at the Wiki page

FPGA Firmware ( "Gateware" ) for AIDA-2020 TLU and AIDA mini-TLU

Uses "IPBus Build" ( ipbb )

Build instructions at Instructions here