Explore projects
-
The robustness of a White Rabbit Network (WRN) is a broad subject covering methods (HW & SW) which enable to increase overall reliability of a WR-based system. This includes Forward Error Correction (FEC), Quality of Service (QoS) assurance, support of network redundancy, proper network design, thorough diagnostics, and increasing the reliability of network components (i.e. switches, nodes). Here, these methods are described and their implementation sources gathered.
Updated -
Updated
-
Updated
-
Projects / AIDA-2020 TLU - Hardware
CERN Open Hardware Licence v1.2Updated -
This project contains all the HDL gateware necessary for the FPGA of the WR switch.
Updated -
A collection of cores needed in the White Rabbit node and switch. Includes White Rabbit PTP Core (WRPC).
Updated -
A software suite written in Python to help with production tests of PCBs. AKA PTS.
%(red)This pts-base project is used to re-organise the current pts project In the future this project will replace the existing pts project.
Updated -
FMC nanoFIP is an interface card for the WorldFIP network in an LPC FMC form-factor. More info at the Wiki page
Archived 0Updated -
A fully open electronic watch project featuring an integrated GPS receiver. More info at the Wiki page
Updated -
Hardware design of the PandABox. Includes schematics, PCB layout and manufacturing files.
Updated -
The aim of this project is to evaluate resources required to run wr switch HDL on Xilinx Ultrascale+ FPGA
Updated -
Projects / HEV - High Energy Ventilator
GNU General Public License v3.0 or laterThe open-source HEV ventilator implements the modes PC-A/C, PC-A/C-PRVC, PC-PSV and CPAP More info at the Wiki page
Updated -
COM Express based PXIe system controller. COM Express Compact Pin-out type 6, 16-lane PCIe GEN3. PXIe trigger line on front-panel. More info at the Wiki page
Updated -
A web based commander based on Node.JS for the HDLMake tool.
Updated -
The TimIQ system is an IQ modulator allowing to phase shift a radio frequency clock with a resolution of 40 fs and an accuracy of 8 ps. Software.
Updated -
Projects / Euro ADC 65M 14b 40cha hw PUMA-hw
CERN Open Hardware Licence v1.2Updated -
High performance pulse and frequency distribution amplifier for time and frequency metrology. The pulse distribution board is an 1:8-channel (1 Hz and up) logic-level distribution amplifier, while the frequency distribution board is an 1:8-channel sine-wave (1-30 MHz) distribution amplifier. Two 1:8 boards fit side-by-sides in a 1U 19" rack enclosure, with either BNC or SMA connectors.
For more information, see the wiki
Updated -
A carrier for two low pin count FPGA Mezzanine Cards (VITA 57), analog inputs and fail-safe functionality. It has memory and clocking resources and supports the White Rabbit timing and control network. Stand-alone board for use in a 'pizza-box'. More info at the Wiki page
Updated -
Gateware (HDL design) for FMC ADC 400k 18b 4cha iso on SPEC and SVEC carriers.
Updated -