Explore projects

READ-ONLY PROJECT TO PRESERVE EXISTING REMOTE URLS

A system to characterise large area silicon pad sensors with several hundred channels. It consists of two PCBs. One is an active switching 512-to-1 matrix. The second one is a passive probe card to contact the sensor. Software.

FPGA Firmware ( "Gateware" ) for AIDA-2020 TLU and AIDA mini-TLU

Uses "IPBus Build" ( ipbb )

Build instructions at Instructions here

Tool for generating multi-purpose makefiles for FPGA projects.

Main features:

makefile generation for: fetching modules from repositories simulating HDL projects synthesizing HDL projects synthesizing projects remotely (keeping your local resources free) generating multi-vendor project files (no clicking in the IDE!) many other things without involving make and makefiles

Hdlmake supports modularity, scalability, revision control systems. Hdlmake can be run on any Linux or Windows machine with any HDL More info at the Wiki page

Enumerates the capacitors in an Altium design by parsing the EDIF netlist and library, showing if insufficient voltage ratings are used (derating). More info at the Wiki page

Tool for generating multi-purpose makefiles for FPGA projects.

Main features:

makefile generation for: fetching modules from repositories simulating HDL projects synthesizing HDL projects synthesizing projects remotely (keeping your local resources free) generating multi-vendor project files (no clicking in the IDE!) many other things without involving make and makefiles

Hdlmake supports modularity, scalability, revision control systems. Hdlmake can be run on any Linux or Windows machine with any HDL More info at the Wiki page

Legacy-VME64x core implements a legacy VME (VMEbus IEEE-1014) and VME64x (based on the vme64x-core) slave.

The core offers for SoC interconnection:

Master WB interconnection and Slave WB for MSI IRQ.

The core also provides a universal layer abstraction for common hardware components in VME design (e.g VME buffers). It allows for geographical and hardware switch addressing. More info at the Wiki page

A software suite written in Python to help with production tests of PCBs. AKA PTS.

%(red)This pts-base project is used to re-organise the current pts project In the future this project will replace the existing pts project.

More info at the Wiki page

A VHDL core for a VME64x slave. The other side behaves like a Wishbone master.

More info at the Wiki page

Collection of WRTD reference designs provided by (and used at) CERN

Gateware (HDL design) for nanoFIP.

ADC testing procedures and software. More info at the Wiki page

Host-side software support for the TDC FMC on the SPEC and SVEC FMC carriers.

More info at the Wiki page

HW project: https://www.ohwr.org/project/fmc-tdc/wiki

A simple 4-lane PCIe carrier for a low pin count FPGA Mezzanine Card (VITA 57). It supports the White Rabbit timing and control network. Commercially available. Linux and Labview drivers available for some mezzanine cards. More info at the Wiki page

An FPGA Mezzanine Card (FMC) with a Time to Digital Converter chip to perform one-shot sub-nanosecond time interval measurements. Commercially available. More info at the Wiki page

A fine delay generator in FMC format with 1 input and 4 outputs. The resolution is 1 ns. Commercially available. More info at the Wiki page

Programmable attenuator of RF signals with very high voltage range (50mV – 1000 V) for protecting digitizers against damage by high voltage signals. Four channels with SMA connectors; Three attenuation values: 0, -20, -40 dB; Bandwidth: DC – 2 GHz.

Mock Turtle is an HDL core of a generic control system node, based on a deterministic multicore CPU architecture. Mock Turtle can use White Rabbit as the means of communication and synchronization in a distributed system. More info at the Wiki page

White Rabbit Trigger Distribution project. More info at the Wiki page