A Precise Time Protocol (PTP, IEEE 1588) software stack whose single source code can be compiled for many architectures (POSIX systems, WR switch, WR node, ...) and which is easily extensible.

Development of software for the White Rabbit switch, and in particular the embedded Linux system running in the ARM9 processor. More info at the Wiki page

DI/OT Kintex Ultrascale-based Peripheral Board with HPC FMC and SODIMM DDR4 slot. More info at the Wiki page

FMC DTX 4CHA is a four channel differential line driver on an FMC. Each channel is driven by a CLC006 IC with max data rate 400 Mb/s. Connector type: LEMO EPG.00.302.NLN.

More info at the Wiki page

Software to support the FMC DIO 32CH TTL A mezzanine, including: configuration application and HDL firmware, with functionality for data acqusition. For use with FCS application. More info at the Wiki page

Programmable attenuator of RF signals with very high voltage range (50 mV – 1000 V) for protecting digitizers against damage by high voltage signals. Four channels with SMA connectors; Three attenuation values: 0, -20, -40 dB; Bandwidth: DC – 2 GHz. VME form factor with I2C management bus. No VME-bus interface, only power supply used. More info at the Wiki page

Optical flow cores process a 640x480 video sequence and estimate direction and speed of the objects in the scene (fixed-point Q7.4) up to 32 fps. A Lucas-Kanade gradient-based and a phase-based Handel-C implementations are provided.

ELMB is an analog/digital input/output module with CANbus interface. About 10000 of ELMBs are used in various CERN installations of experiments running on LHC. They are used in control and monitoring of equipment. The ELMB is radiation qualified for an order of around 35 Gy of total intercepted dose.

AMC FMC Carrier with Kintex is designed to support FMC boards. Equiped in Xilinx Kintex-7 FPGA. It allows to connect clock source to any clock input More info at the Wiki page

Hardware design of FMC ADC 100M 14b 4cha. Includes schematics, PCB layout and manufacturing files.

Legacy-VME64x core implements a legacy VME (VMEbus IEEE-1014) and VME64x (based on the vme64x-core) slave.

The core offers for SoC interconnection:

Master WB interconnection and Slave WB for MSI IRQ.

The core also provides a universal layer abstraction for common hardware components in VME design (e.g VME buffers). It allows for geographical and hardware switch addressing. More info at the Wiki page

FMC 4 channel Serial link transceiver with differential LEMO connectors. Each channel has a MAX3441EESA+ transceiver which follows the RS485 standard. More info at the Wiki page

VME Rear Transition Modules. These are modules that go on the back of a VME64x crate and connect to another module on the front, such as the SVEC. The designs are in sub-projects.

CROME (Cern RadiatiOn Monitoring Electronics) is the new read-out electronics for radiation protection at CERN. It performs analog-to-digital conversion of the current signal generated by the radiation detectors (ionization chambers) installed in and outside CERN perimeter providing a continuous real-time measurement of ambient dose equivalent rates. It generates radiation alarms, interlock signals and provides long term permanent and reliable data logging. More info at the Wiki page

A USB controlled switch box with 1 to 4 switching. Can send out a reference voltage. Multiple configurations possible. Used for the calibration of ADC, TDC and Fine delay mezzanines. More info at the Wiki page

xTCAprojects shows the MTCA and uTCA boards that are developed in the Open Hardware Repository context. Keywords: MTCA.4, uTCA, AMC, MCH.

A fully open electronic watch project featuring an integrated GPS receiver. More info at the Wiki page

Double width AMC CPU board for COM EXPRESS mezzanines, dedicated to MTCA 4.0 for physics. It can function either as Standard AMC or RTM in cooperation with dedicated WR-MCH freeing 1 AMC slot. Features: 4 USB 2.0 ports, 4 USB 3.0 ports, Type 6 COM Express module connector, 2 ESATA ports, custom RTM PCIe x16 connector, 2 Gigabit Ethernet ports, 2 Gigabit Ethernet (SERDES) routed to uTCA Port 0 and Port1 serial console connector, Mini Display Port, Mini HDMI port, mPCIe socket, Extension connector for on-board FPGA mezzanine, Double width, full (or mid) size design.

The image processing library offers multiple cores for on-chip vision-feature extraction. HDL modules are provided in different languages such as Handel-C or VHDL and applicable to various embedded and reconfigurable devices. They can be of interest for applications such as particle tracking, analysis of fluid dynamics, artificial vision for robotics, or object recognition.

Detailed documentation on how to get ready to work with the Simple PCI Express Carrier, including hardware deployment instructions, full required toolchain setup and and a collection of step-by-step demonstrative tutorials.