Explore projects

White Rabbit PTP Core software for LatticeMico32. It consists of a software wrapper for running a PTP daemon without an operating system and device drivers for WRPC HDL internals.

White Rabbit Trigger Distribution project. More info at the Wiki page

A White Rabbit Timing Receiver in AMC (Advanced Mezzanine Card, AdvancedMC) format. More info at the Wiki page

FMC LPC card with two High Voltage (HV) outputs and one Low Voltage (5-10V) output. Has mV voltage sensing and mA current sensing capabilities. More info at the Wiki page

A Time to Digital Converter core for Spartan 6 FPGAs.

Development of software for the White Rabbit switch, and in particular the embedded Linux system running in the ARM9 processor. More info at the Wiki page

FPGA Firmware ( "Gateware" ) for AIDA-2020 TLU and AIDA mini-TLU

Uses "IPBus Build" ( ipbb )

Build instructions at Instructions here

FPGA Firmware ( "Gateware" ) for AIDA-2020 TLU and AIDA mini-TLU

Uses "IPBus Build" ( ipbb )

Build instructions at Instructions here

Programmable attenuator of RF signals with very high voltage range (50mV – 1000 V) for protecting digitizers against damage by high voltage signals. Four channels with SMA connectors; Three attenuation values: 0, -20, -40 dB; Bandwidth: DC – 2 GHz.

A distributed oscilloscope based on the White Rabbit network. More info at the Wiki page

This project guides new users to start in the White Rabbit “World” with simple experiments. The starting kit uses two SPEC + FMC-DIO cards. Each node allows basic operations such as input timestamping or programmable output pulse generation. Additionally, specific software and gateware layers allow to use it as a standard network interface card implementing the White Rabbit technology functionalities.

On the Open Hardware Repository you can find projects which use soft-cpu (e.g. mock-turtle, white-rabbit-core, wr-switch). This project offers a toolchain that you can use to compile your code for the soft-cpu target (only LM32 for the time being). The project provides only the necessary makefiles to build the toolchain, so it will be necessary to compile the toolchain.

This is a port of an older Linux ptpd to support White Rabbit extensions and run both in hosted and freestanding environment. In the future we plan to replace it with PPSI, which has a much better design, but ptp-noposix is currently working pretty well despite being difficult to maintain.

A system to characterise large area silicon pad sensors with several hundred channels. It consists of two PCBs. One is an active switching 512-to-1 matrix. The second one is a passive probe card to contact the sensor. Software.

A system to characterize large area silicon pad sensors with several hundred channels. This repository contains the microcontroller firmware.

SDB (Self-describing Bus) allows to enumerate the cores that are live in the current FPGA binary, either from the host computer or from the internal soft-core CPU in the FPGA itself. The project provides the software support and the specification. More info at the Wiki page

Software support for the SVEC board, including kernel and user-space Linux code.

VHDL core for absolute position encoders (SSI, BISS, ENDAT).

More info at the Wiki page