Explore projects
-
Projects / AIDA-2020 TLU - Gateware
GNU General Public License v3.0 or laterFPGA Firmware ( "Gateware" ) for AIDA-2020 TLU and AIDA mini-TLU
Uses "IPBus Build" ( ipbb )
Build instructions at Instructions here
Updated -
A simple 4-lane PCIe carrier for a FPGA Mezzanine Card (VITA 57). It supports the White Rabbit timing and control network. More info at the Wiki page
Updated -
Idrogen is an Arria10 FPGA board with FMC mezzanine.
PCB design is performed by IJCLab / CNRS-IN2P3. Firmware is developed by Observatoire Radioastronomique de Nançay (ORN) / Observatoire de Paris/ CNRS-INSU
Updated -
High-resolution frequency/phase-microstepper for timing laboratories. More info at the Wiki page
Updated -
Mock Turtle is an HDL core of a generic control system node, based on a deterministic multicore CPU architecture. Mock Turtle can use White Rabbit as the means of communication and synchronization in a distributed system. More info at the Wiki page
Updated -
Project containing information about how to calibrate White Rabbit gear. See also https://www.ohwr.org/project/white-rabbit/wikis/Calibration More info at the Wiki page
Updated -
Brian Koropoff / Hdlmake
GNU General Public License v3.0 onlyTool for generating multi-purpose makefiles for FPGA projects.
Main features:
makefile generation for: fetching modules from repositories simulating HDL projects synthesizing HDL projects synthesizing projects remotely (keeping your local resources free) generating multi-vendor project files (no clicking in the IDE!) many other things without involving make and makefilesHdlmake supports modularity, scalability, revision control systems. Hdlmake can be run on any Linux or Windows machine with any HDL More info at the Wiki page
Updated -
Programmable attenuator of RF signals with very high voltage range (50mV – 1000 V) for protecting digitizers against damage by high voltage signals. Four channels with SMA connectors; Three attenuation values: 0, -20, -40 dB; Bandwidth: DC – 2 GHz.
Updated -
A software suite written in Python to help with production tests of PCBs. AKA PTS.
%(red)This pts-base project is used to re-organise the current pts project In the future this project will replace the existing pts project.
Updated -
Production and functional tests for Conv TTL Blocking. More info at the Wiki page
Updated -
A cute-wr is a compact WR-node implementation with minimum components required. The initial design is derived from SPEC, but would work in an opposite manner as a FMC wr-nic, providing 2 DIO channels, external CLK input, EEPROM, JTAG, RS232, and expandable IOs through FMC connector. The gateware and software of cute-wr would also keep maximum compatibility with SPEC. Project is obsolete. See cute-wr-dp for a similar board.
Updated -
BabyWR is a general purpose small pluggable WR node in a M.2 form-factor. More info at the Wiki page
Updated -
FPGA Firmware ( "Gateware" ) for AIDA-2020 TLU and AIDA mini-TLU
Uses "IPBus Build" ( ipbb )
Build instructions at Instructions here
Updated -
Couples a MAROC ASIC (64 channels each with a fixed threshold discriminator and a slow shaper + sample-and-hold + 12-bit ADC) to a FPGA. Read-out by Gigabit Ethernet (firmware supplied supports IPBus). Multiple boards can be plugged together to increase the channel count. Clocking circuitry compatible with the White Rabbit implementation of PTP. More info at the Wiki page
Updated -
A software suite written in Python to help with production tests of PCBs. AKA PTS.
%(red)This pts-base project is used to re-organise the current pts project In the future this project will replace the existing pts project.
Updated -
High performance pulse and frequency distribution amplifier for time and frequency metrology. The pulse distribution board is an 1:8-channel (1 Hz and up) logic-level distribution amplifier, while the frequency distribution board is an 1:8-channel sine-wave (1-30 MHz) distribution amplifier. Two 1:8 boards fit side-by-sides in a 1U 19" rack enclosure, with either BNC or SMA connectors.
For more information, see the wiki
Updated -
Multi-channel Time Interval Counter and fine delay generator. Housed in a 19" module. Research project. More info at the Wiki page
Updated -
Pascal Bos / Hdlmake
GNU General Public License v3.0 onlyTool for generating multi-purpose makefiles for FPGA projects.
Main features:
makefile generation for: fetching modules from repositories simulating HDL projects synthesizing HDL projects synthesizing projects remotely (keeping your local resources free) generating multi-vendor project files (no clicking in the IDE!) many other things without involving make and makefilesHdlmake supports modularity, scalability, revision control systems. Hdlmake can be run on any Linux or Windows machine with any HDL More info at the Wiki page
Updated -
-
This library provides a generic API for ADC devices, so that applications can use this API to access any of the supported ADC boards. Currently the library supports the following boards:
fmc-adc-100m14b14chaFor testing and debugging purpose it supports also a couple of virtual boards that you can use to start the development of your application.
Updated