Explore projects

Distributed I/O Tier - these are electronics modules installed close to a particle accelerator in radiation-exposed or radiation-free areas controlled by the master in the Front-end tier over the fieldbus. These are usually FPGA-based boards sampling digital and analog inputs, driving outputs and performing various safety critical operations. More info at the Wiki page

White Rabbit Trigger Distribution project. More info at the Wiki page

DI/OT Kintex Ultrascale-based Peripheral Board with HPC FMC and SODIMM DDR4 slot. More info at the Wiki page

White Rabbit is a fully deterministic Ethernet-based network for general purpose data transfer and synchronization. It can synchronize over 1000 nodes with sub-ns accuracy over fiber lengths of up to 10 km. Commercially available. More info at the Wiki page

A fine delay generator in FMC format with 1 input and 4 outputs. The resolution is 1 ns. Commercially available. More info at the Wiki page

RF over Ethernet, a protocol. Based on an extension of IEEE 1914.3 - IEEE Standard for Radio over Ethernet Encapsulations and Mappings. More info at the Wiki page

FMC LPC card with two High Voltage (HV) outputs and one Low Voltage (5-10V) output. Has mV voltage sensing and mA current sensing capabilities. More info at the Wiki page

This open-source 3DMASK offers a FFP2-level protection with the right filter material. It can be produced by anybody in possession of a 3D printer. More info at the Wiki page.

High precision, ultra stable Oven Controlled Crystal Oscillator (OCXO) suitable for the Metrology purposes in a 19" format. Can be used to upgrade the performance of the SPEC7.

Radiation-tolerant AC/DC power supply unit (PSU). In: 230VAC, 50Hz, Out: +12V, 8.33A (100W) and +5V, 2A (10W). Possibility for redundancy. The design is CompactPCI compatible. Part of DIOT project.

FMC-PROFINET is a PROFINET device (“slave”) card based on the Siemens ERTEC200 chip in the FMC-LPC form-factor.

Zynq CarrIer for Timing sYstems based on radiofrequency over White Rabbit, aka CITY.

FMCprojects shows the FMC Mezzanine and Carrier boards that are developed in the Open Hardware Repository context. Furthermore it gives useful data helping you to design modules complying to this VITA 57.1 standard. This actually is not a hardware project, but is there to help you find your way in the FMC standard and shows you which FMC Mezzanines and Carriers are being developed in the context of the Open Hardware project.

FMC Projects Wiki home page

OHR project where you can get help and guidelines about OHR. It's a support project for questions/feedback and bugs. More info at the Wiki page

A meta project used to discuss and present information about Open Hardware and related subjects. More info at the Wiki page More info about the CERN Open Hardware licence More info about the OHR.org site support

A Time to Digital Converter core for Spartan 6 FPGAs.

The FmcAdc1G8b2cha is a 2 channel 1GSPS 8 bit ADC card in FMC (FPGA Mezzanine Card, VITA 57.1) format using a Low Pin-Count (LPC) connector.

More info at the Wiki Page

FmcDIO5chTTLa is a 5-bit port digital IO card in FMC form-factor. Each single-bit port can be configured individually as input or output. The I/Os on LEMO 00 connectors are TTL compatible. Commercially available. More info at the Wiki page

Production and functional tests for fmc-dac-600m-12b-1cha-dds

The uRV (Micro RISC-V) core is a small-sized implementation of a 32-bit RISC-V core, targeted specifically at FPGAs. More info at the Wiki page