Explore projects

A system to characterise large area silicon pad sensors with several hundred channels. It consists of two PCBs. One is an active switching 512-to-1 matrix. The second one is a passive probe card to contact the sensor. Software.

Tester board to test PXIe processor modules. Two variants: slot 2 and slot 10 (system timing slot). More info at the Wiki page

A collection of platform-independent cores such as memories, synchronizer circuits and Wishbone cores.

More info at the Wiki page

Production and functional tests for PXIe controller COM Express based. More info at the Wiki page

MMC firmware written in C, running on a microcontroller inside the board. Written first for the AFC boards. This firmware is thought to be generic enough so other AMC boards could reuse a large part of it. For now, the only "port" is for the LPC1764 chip, but more are planned.

Hydra is a RISC-V based radiation-tolerant SoC designed to operate up to 500 Gy TID. See the wiki for more details.

This project defines data structures, to be embedded in the FPGA memory address space, to enumerate the devices that have been synthetized in the current design. The same structure is also used as a simple flash file system. AKA Self-Describing Bus (SDB) Specification for Logic Cores. The layout is simple enough to be parsed both by the host and by the internal soft-core, if any.

The documentation is public, and related code is GNU GPL licensed.

The robustness of a White Rabbit Network (WRN) is a broad subject covering methods (HW & SW) which enable to increase overall reliability of a WR-based system. This includes Forward Error Correction (FEC), Quality of Service (QoS) assurance, support of network redundancy, proper network design, thorough diagnostics, and increasing the reliability of network components (i.e. switches, nodes). Here, these methods are described and their implementation sources gathered.

The VFC is a VME carrier for two VITA 57 (FMC) mezzanines. For more details please refer to the wiki pages. Obsolete project. Replaced by VFC-HD.

This project focuses on performing with high precision the core WR PTP calculations in fixed-point arithmetic. This will ensure uniform input parameters, code and precision across all WR implementations.

This library provides a generic API for ADC devices, so that applications can use this API to access any of the supported ADC boards. Currently the library supports the following boards:

fmc-adc-100m14b14cha

For testing and debugging purpose it supports also a couple of virtual boards that you can use to start the development of your application.

More info at the Wiki page

This is a collection of simple macro implementations for Microsemi's ProASIC3 FPGAs to allow simulating post-synthesis designs using GHDL.

TiCkS is a flexible White Rabbit based time-stamping board. It is based on the SPEC board developed for the CTA collaboration. It provides an interface to a CTA camera (Inputs: Read-out Trigger signals, Busy Trigger), (Outputs: PPS signal , 10MHz clock, External trigger signal).

More info at the Wiki page

This library provides a generic API for ADC devices, so that applications can use this API to access any of the supported ADC boards. Currently the library supports the following boards:

fmc-adc-100m14b14cha

For testing and debugging purpose it supports also a couple of virtual boards that you can use to start the development of your application.

More info at the Wiki page

Configuration and boot software required to start up the SPEC7 board

Test. May be deleted.

Production and functional tests for FMC TDC 1ns 5cha.

A low cost, low complexity FMC carrier based on Xilinx Artix-7

Production and functional tests for the MasterFIP.