Explore projects

Etherbone is an FPGA-core that connects Ethernet to internal on-chip wishbone buses permitting any core to talk to any other across Ethernet.

A system to characterize large area silicon pad sensors with several hundred channels. This repository contains the microcontroller firmware.

BabyWR is a general purpose small pluggable WR node in a M.2 form-factor. More info at the Wiki page

Programmable attenuator of RF signals with very high voltage range (50mV – 1000 V) for protecting digitizers against damage by high voltage signals. Four channels with SMA connectors; Three attenuation values: 0, -20, -40 dB; Bandwidth: DC – 2 GHz.

A software suite written in Python to help with production tests of PCBs. AKA PTS.

%(red)This pts-base project is used to re-organise the current pts project In the future this project will replace the existing pts project.

More info at the Wiki page

We have designed an FPGA Mezzanine card (standard FMC/Vita 57) for high-channel-count electrophysiology, with 128 channels (potentially up to 512), based upon Intan Tech's RHA2132 (2 uV rms input-referred noise), sampled at 25kHz 18bit by AD7982. We are basing our design on the reference design provided by Reid Harrison of Intan Tech for their 16-channel evaluation board. The expected cost of the device should be under 5000$.

In order to have an integrated solution we intend to have as default carrier the Opal Kelly Shuttle LX1, an inexpensive USB FMC carrier with an excellent USB controller. The integrated solution will be completed with software on the PC side to grab to disk continuously and/or display in some fashion all 128 channels.

Our status: We have an alpha card. It has passed most tests---we can grab from any channel at 1MS/s. We have an alpha microcode: it grabs from any channel and stores on the PC.

Our current team: Marcelo Magnasco (Rockefeller University, New York), design. Andres Cicuttin (ICTP, Trieste), schematics + fpga Maria Liz Crespo (ICTP, Trieste), fpga Sanjee Abeytunge (MSKCC, New York) layout Nicholas Joseph (RU) Macintosh drivers

A cute-wr is a compact WR-node implementation with minimum components required. The initial design is derived from SPEC, but would work in an opposite manner as a FMC wr-nic, providing 2 DIO channels, external CLK input, EEPROM, JTAG, RS232, and expandable IOs through FMC connector. The gateware and software of cute-wr would also keep maximum compatibility with SPEC. Project is obsolete. See cute-wr-dp for a similar board.

Project containing information about how to calibrate White Rabbit gear. See also https://www.ohwr.org/project/white-rabbit/wikis/Calibration More info at the Wiki page

A software framework for Linux device drivers aimed at supporting controls and data acquisition hardware. ZIO supports sub-nanosecond timestamps, block-oriented input and output and transport of meta-data with the data samples. Users can change the buffer type and trigger type associated with a device at run time, and all of devices, triggers and buffers are easily implemented as add-on modules.

The PF_ZIO implementation, currently in beta status, implements a network interface to the ZIO transport, which allows each I/O channel to generate or receive network frames. Applications see the network of devices and can talk with several of them from the same socket. We support SOCK_STREAM, SOCK_DGRAM and SOCK_RAW.

A White Rabbit compliant Network Interface Card (NIC) based on the SPEC and the DIO FMC. This project hosts the HDL and associated software to configure the SPEC so it behaves as a NIC under the Linux OS.

Collection of WRTD reference designs provided by (and used at) CERN

LIBSFP is a software library that contains generic functions to access SFP devices via I2C.

More info can be found on this wiki page.

Mock Turtle is an HDL core of a generic control system node, based on a deterministic multicore CPU architecture. Mock Turtle can use White Rabbit as the means of communication and synchronization in a distributed system. More info at the Wiki page

Tester board to test PXIe processor modules. Two variants: slot 2 and slot 10 (system timing slot). More info at the Wiki page

A software framework for Linux device drivers aimed at supporting controls and data acquisition hardware. ZIO supports sub-nanosecond timestamps, block-oriented input and output and transport of meta-data with the data samples. Users can change the buffer type and trigger type associated with a device at run time, and all of devices, triggers and buffers are easily implemented as add-on modules.

The PF_ZIO implementation, currently in beta status, implements a network interface to the ZIO transport, which allows each I/O channel to generate or receive network frames. Applications see the network of devices and can talk with several of them from the same socket. We support SOCK_STREAM, SOCK_DGRAM and SOCK_RAW.

This library provides a generic API for ADC devices, so that applications can use this API to access any of the supported ADC boards. Currently the library supports the following boards:

fmc-adc-100m14b14cha

For testing and debugging purpose it supports also a couple of virtual boards that you can use to start the development of your application.

More info at the Wiki page

A system to characterise large area silicon pad sensors with several hundred channels. It consists of two PCBs. One is an active switching 512-to-1 matrix. The second one is a passive probe card to contact the sensor. Software.

EPICS support for Wishbone peripherals: This project consist of a Generic EPICS IOC AsynDriver to support wishbone peripheral. It include the following features:

Driver for X1052, Gennum, Etherbone WB master. Direct access to any register in the wishbone bus Auto-generation of EPICS Database file using wbgen2 Automatic real number convertion (2 complements, fixed point, signess) using .wb file Support for WR Core and other internal bus protocols (i2c, spi, etc.)

More info at the Wiki page

Software support for the SPEC board, including kernel and user-space Linux code. The package also include the fmc-bus driver, which is expected to be used by other carriers as well.