Explore projects
-
Projects / Hdlmake
GNU General Public License v3.0 onlyTool for generating multi-purpose makefiles for FPGA projects.
Main features:
makefile generation for: fetching modules from repositories simulating HDL projects synthesizing HDL projects synthesizing projects remotely (keeping your local resources free) generating multi-vendor project files (no clicking in the IDE!) many other things without involving make and makefilesHdlmake supports modularity, scalability, revision control systems. Hdlmake can be run on any Linux or Windows machine with any HDL More info at the Wiki page
Updated -
Projects / HEV - High Energy Ventilator
GNU General Public License v3.0 or laterThe open-source HEV ventilator implements the modes PC-A/C, PC-A/C-PRVC, PC-PSV and CPAP More info at the Wiki page
Updated -
Projects / Software for White Rabbit PTP Core
GNU General Public License v2.0 or laterWhite Rabbit PTP Core software for LatticeMico32. It consists of a software wrapper for running a PTP daemon without an operating system and device drivers for WRPC HDL internals.
Updated -
DI/OT Zynq Ultrascale-based System Board with White Rabbit support. More info at the Wiki page
Updated -
DI/OT Kintex Ultrascale-based Peripheral Board with HPC FMC and SODIMM DDR4 slot. More info at the Wiki page
Updated -
A simple VME64x carrier for two low pin count FPGA Mezzanine Cards (VITA 57). It has memory and clocking resources and supports the White Rabbit timing and control network. Commercially available. More info at the Wiki page
Updated -
A fine delay generator in FMC format with 1 input and 4 outputs. The resolution is 1 ns. Commercially available. More info at the Wiki page
Updated -
Projects / VME64x core
GNU Lesser General Public License v2.1 onlyA VHDL core for a VME64x slave. The other side behaves like a Wishbone master.
More info at the Wiki pageUpdated -
Projects / FMC DEL 1ns 2cha
GNU Lesser General Public License v2.1 onlyA fine delay generator in FMC LPC format with 1 input and 2 outputs. The resolution is 1 ns. Optimized for high frequency pulse repetition rates synchronized to an external clock. More info at the Wiki page
Updated -
-
SAMD21-based monitoring module for DI/OT power supply and fan tray.
Updated -
A simple 4-lane PCIe carrier for a low pin count FPGA Mezzanine Card (VITA 57). It supports the White Rabbit timing and control network. Commercially available. Linux and Labview drivers available for some mezzanine cards. More info at the Wiki page
Updated -
Projects / AIDA-2020 TLU - Gateware
GNU General Public License v3.0 or laterFPGA Firmware ( "Gateware" ) for AIDA-2020 TLU and AIDA mini-TLU
Uses "IPBus Build" ( ipbb )
Build instructions at Instructions here
Updated -
-
Projects / White Rabbit Switch - Software
GNU General Public License v2.0 or laterDevelopment of software for the White Rabbit switch, and in particular the embedded Linux system running in the ARM9 processor. More info at the Wiki page
Updated -
Projects / FMC High-Voltage supply - fmc-hv-2ch
GNU Lesser General Public License v2.1 onlyFMC LPC card with two High Voltage (HV) outputs and one Low Voltage (5-10V) output. Has mV voltage sensing and mA current sensing capabilities. More info at the Wiki page
Updated -
A simple 4-lane PCIe carrier for a FPGA Mezzanine Card (VITA 57). It supports the White Rabbit timing and control network. More info at the Wiki page
Updated -
An FPGA Mezzanine Card (FMC) with a Time to Digital Converter chip to perform one-shot sub-nanosecond time interval measurements. Commercially available. More info at the Wiki page
Updated -
Idrogen is an Arria10 FPGA board with FMC mezzanine.
PCB design is performed by IJCLab / CNRS-IN2P3. Firmware is developed by Observatoire Radioastronomique de Nançay (ORN) / Observatoire de Paris/ CNRS-INSU
Updated -
This is a PCB-design + Arduino firmware for an Ethernet-controlled 1:8 RF-multiplexer. It allows selecting as output one of eight input-channels, as commonly used e.g. in timing-laboratories when one wants to measure many RF-sources (clock outputs like 1PPS or 10MHz) with a single instrument (frequency or time-interval counter). The design is for two independent MUX-boards to fit in a 1U 19” rack enclosure. For more information, see the wiki
Updated